Every garden is unique. Take a look at a selection of my projects, where I combined technology with nature.
A new build I did in autumn. I cut the trenches with a trencher, and the valves sit on a manifold in a single box. Water comes from a well, and the pump control is on the wall right next to the Hunter controller. I set the controller up in the app, so the owner can run the irrigation from a phone.
Completed 2025
A rural yard with an old barn, where the water source is a well. I mounted four valves on the wall of a concrete chamber with the pump control box next to them, so everything is in one dry place. I laid the pipes in freshly prepared soil before the lawn went in.
Completed 2025
An older garden with a long-established lawn, a mulched bed, a large rounded shrub and thujas along the wall. I cut the lawn only where the pipe went and put the turf back. The box holds three valves and a shut-off on the supply, so the whole system is easy to isolate.
Completed 2025
A new build in Rusovce where I installed the irrigation on the levelled plot before the lawn was sown. Before sowing I tested and adjusted every sprinkler so it covers its area right up to the paving and the high wall on the boundary.
Completed 2025
A new build with a concrete fence, where I did the irrigation before the garden was finished. The controller is in an outdoor enclosure right by the valve boxes, so no cable had to run into the house. The lawn is now established and the sprinklers by the terrace water right up to the edge of the tiles.
Completed 2025
A large old garden with fruit trees and an established lawn, which I did in early spring. Because of its size the system has many zones, with the valves split between two boxes by the gazebo. I ran the trenches through the existing lawn and along the gravel path to dig up as little of the garden as possible.
Completed 2024
Service on an older system I had not installed, with a Toro controller. I rebuilt the valve box, replaced the valves and fittings, and laid new pipe and valve cable along the paving. After the repair I ran through every zone and set the programmes.
Completed 2024
A new build with a pool and a large-format tiled terrace, with only fields beyond the fence. I installed the irrigation before the lawn and set the sprinklers by the pool so they spray neither into the water nor onto the tiles. Water comes from a well, and the valves and pump controller share one box.
Completed 2024
A new build on stony fill where nothing moved without a mini excavator. Water comes from a well on the plot. The valves are split between two boxes side by side, feeding every part of the garden. Before the lawn was sown I tested both the spray heads and the rotors.
Completed 2024
First start-ups of irrigation systems I installed. Real footage, no editing, no advertising.
Message me on WhatsApp
Scan the code with your phone camera, or open the chat on this computer.
Open WhatsApp
This site uses cookies to ensure the best experience. Choose which categories you want to allow. More information is available in the privacy policy .